R-CAS-V VINYLESTER SPIN-IN CAPSULES FOR THREADED RODS 20MM

Capsule for 20mm threaded rod

[Qty: 6/Box]

High-performance, quick-setting, styrene-free vinylester resin for concrete. Spin-in capsule for threaded rods where extreme strength is required.

Features and Benefits:

• Approved for use with threaded rods in non-cracked concrete (ETAG001 Option 7)
• High performance for use safety critical application – heavy-duty fastenings with small spacing and edge distances
• The system relies on the adhesion between the concrete and resin, which is free from expansion forces. This makes it an ideal choice where close edge and spacing distances are required
• Capsule contains precise amounts of ingredients making it a very consistent product
• Suitable for making fixings underwater. Adhesive strength is not affected by unpolluted water
• Suitable for dry or wet non-cracked concrete
• Styrene free – odourless

Applications

• Threaded rods
• Balustrading
• Railings
• Heavy machinery
• Structural steel
• Steel columns
• Cladding restraints
• Curtain walling
• Fencing & gates manufacturing and installation
• Formwork support systems
• Garage doors
• Guard rails

Base materials

Approved use in:

• Non-cracked concrete C20/25-C50/60
• Natural Stone

R-STUDS

Size			M8	M10	M12	M16	M20	M24	M30
Thread diameter	d	[mm]	8	10	12	16	20	24	30
Hole diameter in substrate	d0	[mm]	10	12	14	18	24	28	35
Installation torque	Tinst	[Nm]	10	20	40	80	120	180	300
Min. hole depth in substrate	h0	[mm]	hef + 5	hef + 5	hef + 5	hef + 5	hef + 5	hef + 5	hef + 5
Installation depth	hnom	[mm]	80	90	110	125	170	210	270
Min. substrate thickness	hmin	[mm]	120	130	140	180	230	270	340
Min. spacing	smin	[mm]	0.5 * hef 40	0.5 * hef 40	0.5 * hef 40	0.5 * hef 40	0.5 * hef 40	0.5 * hef 40	0.5 * hef 40
Min. edge distance	cmin	[mm]	0.5 * hef 40	0.5 * hef 40	0.5 * hef 40	0.5 * hef 40	0.5 * hef 40	0.5 * hef 40	0.5 * hef 40

Minimum working and curing time

Resin temperature	Concrete temperature	Curing time*	Working time
[°C]	[°C]	[min]	[min]
5	-5	480	–
5	0	240	–
5	5	150	–
10	10	120	–
15	15	90	–
20	20	45	–
25	30	20	–
25	40	10	–

Installation guide

1. Drill hole to the required diameter and depth for socket size being used.
2. Clean the hole with brush and hand pump at least four times each. It is very important and necessary before installation.
3. Insert capsule into the hole. Connect stud to drilling machine using appropriate driver system.
4. Position the stud into the glass capsule then switch on the drilling machine and drive stud into the capsule. Switch off the drilling machine as soon as the bottom of hole is reached.
5. Leave the anchor undisturbed unitl the curing time elapses.
6. Attach fixture and tighten the nut to the required torque.

Installation guide

1. Drill hole to the required diameter and depth for socket size being used.
2. Clean the hole with brush and hand pump at least four times each. It is very important and necessary before installation.
3. Insert capsule into the hole. Connect stud to drilling machine using appropriate driver system.
4. Position the stud into the glass capsule then switch on the drilling machine and drive stud into the capsule. Switch off the drilling machine as soon as the bottom of hole is reached.
5. Leave the anchor undisturbed unitl the curing time elapses.
6. Attach fixture and tighten the nut to the required torque.